0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

This brass tube can be used in low load applications such as roller axles or as a spacer for a #10 screw. This tube is 1.54 inches long and has an outside diameter of 0.25 inches.

0.172 in. ID 0.250 in. OD 0.750 in. Long Aluminum Spacer - AndyMark, Inc

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

0.166 in. ID 0.375 in. OD 1.100 in. Long Aluminum Spacer - AndyMark, Inc

This is a plastic shoulder spacer. It is a spacer with a flange on one end. It is particularly usefull for turning a 1/2 in. round bearing into a 3/8

0.375 in. ID 0.500 in. OD 0.320 in. Long Nylon Shoulder Spacer

0.140 in. ID 0.250 in. OD 0.156 in. Long Nylon Spacer - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

This aluminum spacer is 1.000 inches long and has an outer diameter of 0.313 inches.

0.192 in. ID 0.313 in. OD 1.000 in. Long Aluminum Spacer

This aluminum spacer is 0.438 inches long and has an outer diameter of 0.5 inches.

0.257 in. ID 0.5 in. OD 0.438 in. Long Aluminum Spacer

0.379 in. ID 0.437 in. OD 0.820 in. Long Brass Spacer - AndyMark, Inc

0.192 in. ID 0.375 in. OD 2.000 in. Long Aluminum Spacer - AndyMark, Inc