Stainless Steel 1/2 Male Compression Fitting — Toronto Brewing

Connects tubing to threaded pipe conforming to NPT standard.

This compression tube fitting is made of stainless steel, and connects tubing to threaded pipe conforming to the National Pipe Thread (NPT) standard in a straight run. This coupling is for a fixed connection between tubing and pipe made of stainless steel. A twin ferrule compression fitting connects to tubing on one end for a leak-resistant seal in high-pressure, high-vacuum, and high-vibration applications, and a male NPT connector on the other end connects to threaded pipe. This fitting is made of chemically hardened stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel.

Washers, Locknuts, and Plugs - Stainless Steel Fittings - Brewing Equipment - Toronto Brewing

A great way to set up a homemade Mash Tun. These fittings are designed to thread into the inside of a bulkhead fitting, and clamp down on a copper or

Stainless Compression Fitting - 3/8 in. x 1/2 in. MPT

Weldless Bulkhead Fitting, 1/2 Stainless Steel Home Brew Weldless Bulkhead Valve Fitting for Kettle Keg Bulkhead : : Home

◆Origin: China ◆Used on your kettle,mash-tun,pump and chiller. ◆Lifelong use material SS304 for brewing applications. ◆Stainless Steel Quick

Brewing Beer Stainless Steel Male Quick Disconnect FPT 1/2 inch

Used on the Hot Liquor Tank water return. May also be used to attach a HERMS coil to a kettle with female 1/2 NPT couplers. 304 Stainless.

Stainless steel 1/2 compression x 1/2 NPT male fitting

Fitting - Compression Fitting - NPT Male 1/2 to 1/2 Tube

Compression Fittings - Homebrewing Hardware - Canuck Homebrew Supply, Canada

Pumps & Hardware — Toronto Brewing

Pumps & Hardware — Toronto Brewing

1/2 Stainless Steel Compression Tee

Stainless Steel Elbow 1/2 Male Compression Fitting — Toronto Brewing

Pumps & Hardware — Toronto Brewing