Five (5) bolt sending unit for use with Tanks Inc. fuel tanks Utilize these sending with your Tanks Inc. tank and factory or aftermarket fuel level gauge. Simply select the appropriate application. Tanks Inc. optional fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep b
Five (5) bolt sending unit for use with Tanks Inc. fuel tanks
Utilize these sending with your Tanks Inc. tank and factory or aftermarket fuel level gauge. Simply select the appropriate application.
Tanks Inc. optional fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground they work on all 6-24 volt systems positive or negative ground. They do not have a fuel pickup tube built into them as some original senders may have. Made with a high quality ceramic board rheostat. Our fuel senders are available for the following applications.
Application Listing:
SW - SW gauges - 240-33 Ohms
VDO - VDO gauges - 10-180 Ohms
GME - GM up to 1964 - 0-30 Ohms
GML - GM 1965 and up - 0-90 Ohms
ORG - Early Ford & Mopar - 73-10 Ohms
The first number of the (Ohms) represents empty and the following is for full.
Universal Fuel Sending Units
SENSOR, FUEL LEVEL, ADJUSTABLE, 240 OHM EMPTY TO 33 OHM FULL, SWING-ARM TYPE
Bolt in pickup assembly Tanks inc. PTA-G
29224166, Transfer Tanks
Universal Gas Fuel Sender 5 Bolt Sending Unit GM '65 & Up - Gearhead Enterprises
5 Bolt Fuel Sending Unit
9800 Marine - Rochester Sensors
Spectra Fuel Tank Sending Unit
GPA Series Fuel Pump assembly from Tanks Inc. GPA 2 & GPA 4
Floatless Fuel Sending Unit
/wp-content/uploads/2023/09/cies-fuel