Flare Long Milled Nut - Boshart Industries

Flare fittings are suitable for use in the plumbing and heating industries for gas, oil, air and water. They are applicable with aluminum, brass, copper and steel tubing. Flare fittings can be disassembled and reassembled many times with no effect on the seal.

Our durable black iron fittings are pressure tested at the factory. The 1” 90 degree street elbow is not for use with potable drinking water. Use for

1 Black Iron 90 Degree Street Elbow

Fittings - Page 7 of 12 - Boshart Industries

415F - LONG MILLED NUT 5/16 FL BRASS

Boshart Industries: 3/4 Black Iron Coupling :: Brantford Home Hardware

415F - LONG MILLED NUT 5/16 FL BRASS

Pipes, Tubes & Fittings Independent Mechanical Supply

Boshart Industries Part # AVC-DWP - Boshart Industries 1-1/4 In. Deep Well Air Volume Control Valve Lead Free - Adapters & Fittings - Home Depot Pro

Our durable black iron fittings are pressure tested at the factory. The 1” hex bushing is not for use with potable drinking water. Use for above

1 x 1/2 Black Iron Hex Bushing

1-1/2 Black Iron 90 Degree Elbow

BF Series Brass Flare Fitting Information

Long Milled Nuts

Flare Fittings - Boshart Industries

Mechanical Business July/August 2022 by Mechanical Business - Issuu

Long Milled Nuts

Flare Fittings - Boshart Industries