Ultra Lightweight Woven Fusible Interfacing IS8030 – berensteintextiles

4.7

(533)

Write Review

$ 4.99

Add to Cart

Qty

In stock

Description

This Ultra Lightweight Woven Fusible Interfacing IS8030 is suitable for all woven fabrics such as silk dresses, skirts and blouses. This fabric is wonderfully lightweight fusible interfacing that serves protection and body for your garment. Woven from 100% Nylon yarns, this sheer, graceful fabric is pre-treated for eas

Content:
100% Nylon

Structure:
Stability in the lengthwise grain and slight give in the cross grain
58/60 Inches Wide
34 grams
Fusible - Pre-Treated
IS 8030

Hand:
lightweight and soft

Luster:
This fabric has no shine

Tips and Tricks:

Heat and moisture melt the resin, and pressure pushes it into the fibers
Read the instructions with the interfacing
Cover the pressing surface with paper towels. Place the fabric wrong side up on the paper towels
Place the interfacing resin side down on the fabric
HINT: When fusing to a portion of a section, trim the edge with pinking shears to avoid a demarcation line
Cover with a press cloth, dry or wet depending on the instructions
Baste press lightly in several areas if the section is large
NOTE: When working with loosely woven fabrics, the garment section is frequently larger than the interfacing, even though they were cut thy the same pattern. Do not force the edges to match; the fashion fabric has stretched out of shape. If you have cut accurately, the use the interfacing as a guide.
Set Iron on Wool
Beginning in the center of the section, fuse toward the edges. Press hard with steam, unless the instructions indicate otherwise for 10 to 15 seconds. Overlap the fused areas carefully to avoid a bare section. do not slide the iron
Turn the section over, cover with a press cloth and fuse the other side
Allow the section to cool before moving it
Test to make sure all corners are securely fused