HXTAL - Hang Your Glass - Clear Gap Filling Glass Glue

For glass, metal, ceramics, plastic, stone, wood, ivoryAdhesive Requirements:Clear & Gap FillingSurface area 1/2” or greater for best resultsSet time 72 hours at room temp 72° or higher, cure time 7 daysSmall - 1ozLarge - 2ozEasy as 1,2,3…Instructions for use:1. Clean both the metal and the glass with 100% Acetone. This can bepurchased from your local hardware store. No substitutes such as Isopropyl or nail polish remover should be used for cleaning.2. Pour B into part A. Stir content with spatula included with a smooth swirl motion. Keep lid off and let sit in a dust free room for 2 hours to let tiny air bubble to travel to the top and dissipate. The longer it sets, the thicker it will become.3. Apply the epoxy to the desired area of glass (or other median) and place stand-off on glass. Tape the stand-off to guarantee the placement during the 72 hour set time (room temperature), expect longer if you are filling a gap.HXTAL cures in 7 days at room temperature.Notes: To speed up the set and/or cure time increase the temperature in the room. If you want to clean up excess adhesive use an Xacto knife (scalpel) after the epoxy has set. HXTAL does not expire but once mixed you can freeze and use one more time within 7 days. It will become thicker the second and final use, or the longer it sits.

2022 GAS Journal by Glass Art Society - Issuu

HXTAL NYL-1, clear glue for glass Mediums, Binders & Glues

Using HXTAL as a Clear Coat on Glass - Videos–Adhesives - Support

Can you use Super Glue on glass? - Quora

HXTAL NYL-1 Epoxies Adhesives Surfacing, 43% OFF

HXTAL NYL-1 Epoxy Adhesive 2 Pound Kit

How to Mix and use HXTAL NYL-1 to laminate glass

Using HXTAL as a Clear Coat on Glass - Videos–Adhesives - Support

HXTAL NYL-1 Epoxy Adhesive 1/2 Pound Kit

HXTAL NYL-1, clear glue for glass Mediums, Binders & Glues

HXTAL NYL-1 Epoxy Adhesive – Stained Glass Stuff

Instant Glass Glue-.07oz

Instant Glass Glue, 3 pack : : Home

Adhesive Hang Your Glass

I have a old cabinet with silding mirror doors the metal handles are attached directly on the glass with some sort of glue, one fell off so what should I use to