The Janome 4mm Hemmer Foot for 9mm Machines is used for making rolled edges on light to medium weight fabrics. The channel guide holds the rolled fabric and allows for a straighter hem. The hemming (hemming) foot will allow us to provide a nice, aesthetic finish to dresses, skirts, blouses, shirts, bedding, tablecloths, table runners and curtains. It is designed for sewing light and medium thickness fabrics. Before hemming, fold the edge of the fabric twice to a width of 4 mm and it is good to press it to a length of approx. 3 cm. Then, when sewing, it is enough to guide the fabric evenly, because the guide on the foot will make a perfectly even fold of the fabric itself. The width of the hem after stitching is 4 mm.
Janome America: World's Easiest Sewing, Quilting, Embroidery
Sewing Machines, Sergers & Accessories - Page 6
Sewing Machines, Sergers & Accessories - Page 6
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
Janome Rolled Hemmer Foot #820809014 Sewing Machines
Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre
Blind hemming can sometimes be a little bit tricky so the blind hem foot goes some way to helping improve this technique. The foot has a metal guide
Blind Hem Foot 825817009 - Janome
Hemmer Foot 4mm D2 for Janome 9mm machines
Blind Hem Foot 825817009 - Janome