The MIRA Safety MOPP-1 is a professional-grade hazardous environmental suit for combat operations.
The MIRA Safety MOPP-1 CBRN Protective Suit provides next-generation protection from chemical, biological, and even nuclear threats.
Whereas most traditional hazmat suits are engineered to be impermeable, the MIRA Safety MOPP-1 CBRN Protective Suit has the same advanced semipermeable construction as the suits used by the US Military.
Thanks to its special construction that includes an integrated layer of embedded carbon spheres, this suit effectively “breathes” while providing total body protection to the user. As a result, it can be worn for much longer periods in hazardous environments because the risk of exhaustion or dehydration is reduced.
It’s also engineered to be far more durable than the average hazmat suit. With its semi-permeable construction, the MOPP Suit is designed to be worn during active duty use and for long periods in response to elevated threat levels. Most hazmat suits are designed for one-time use, but the MIRA Safety MOPP-1 CBRN Protective Suit will last a minimum of 30 days under average use conditions and up to 10 decontamination washes.
If the suit and user are not exposed to direct CBRN threats, the suit can be worn for up to 10 years, presuming it is not damaged or compromised.
Featuring superior puncture resistance and a digital camouflage pattern, the MIRA Safety MOPP-1 CBRN Protective Suit is a top-tier solution that protects against chemical warfare agents (CWA) and toxic industrial chemicals (TIC).
Key Features of the MIRA Safety MOPP-1 CBRN Protective Suit
Semipermeable construction like the MOPP Suits used by the US military
Enhanced ventilation enables longer use compared with traditional hazmat suits, even in extreme environments
Embedded, activated carbon spheres that filter the ambient air
Designed for long-term use
Flame retardant, according to ISO 6940:2004
Can be washed up to 10 times at 40°C (104°F) to decontaminate after potential exposure
Lightweight (5.5 lbs.) to enable mobility and minimize fatigue
Integrated hood that adapts to fit respirators
Compatible with all MIRA Safety gas masks and most CBRN respirators/hoods
Front zipper with covering flap for easy donning and maximum protection
One-piece coverall design to reduce the possibility of vapor and gas ingress
Includes a hermetically sealing storage bag and pump
Minimum 10-year shelf life when stored in its original packaging in appropriate storage conditions
Made in the Czech Republic
The Next Generation of Protective CBRN Suits
The MIRA Safety MOPP-1 CBRN Protective Suit delivers protection above and beyond anything else available on the civilian market today.
Indeed, it’s even superior to the protective gear trusted by most military, police, and professional operators worldwide. Most entry-level biohazard suits are only designed to provide limited protection for workers on a job site and are designed to be replaced after a single day’s use, with more focus on affordability than extended protection.
Higher-grade hazmat suits can provide a wider range of protection, but they’re also limited in that they are impermeable. So, in addition to keeping threats out, they keep air out too. As a result, the use time for these types of hazmat suits is limited. When performing work that requires strenuous effort, users can become dehydrated or exhausted after as little as an hour of work.
The first MOPP Suits were developed to solve a specific challenge for the military—allowing soldiers to maintain maximum readiness and mobility without compromising on protection from gas and vapor threats.
The MOPP-1 is the latest evolution of protective suits, engineered to provide all-day comfort and protection from direct exposure to deadly chemical and toxic threats. It’s available in multiple sizes to fit various body types.
When stored in its original packaging in appropriate conditions (see below), the MOPP-1 CBRN Protective Suit will last ten years.
Remember, when wearing a MOPP Suit, users will require the addition of a functioning full-face respirator, a properly CBRN-rated filter, butyl gloves, and boots to ensure proper protection from airborne contaminants, radioactive particles, and other threats.
For storage after use, we recommend purchasing clothing storage bags that are hermetically sealed and come with a hand pump. These bags usually feature a double zip and a triple seal valve, ensuring a perfect hermetically-seal that will reduce the size of your MOPP-1 Suit by up to 50% for easier long-term storage.
MOPP Suit Storage
The MOPP-1 CBRN Protective Suit should be stored either in the original packaging at temperatures from -30°C to +50°C or in a hermetically sealed bag, with a relative humidity of up to 80% and without direct exposure to sunlight or heat sources.
Under these conditions, the suit’s shelf life is at least ten years.
MOPP Suit Cleaning and Maintenance
After exposure or use, the CBRN MOPP-1 Suit should be cleaned and disinfected according to the manufacturer's instructions included with the packaging. Your MOPP-1 Suit can be washed up to 10 times in this manner without compromising its protective abilities. Once a suit has been washed ten times, remove it from rotation. Never use a MOPP Suit that is not properly disinfected and decontaminated. In case of doubt, dispose of the suit in accordance with local regulations, and use a new one. The MOPP-1 Suit requires zero end-user maintenance. If a suit is compromised, torn or cut, DO NOT attempt to repair it.
Technical Specifications
Structural Parameters
EN ISO
Specification
Tolerance
Weave
EN 40161
Ripstop
Global composition
EN 40110
64% Lenzing FR/30% Meta-aramid/5% Para-aramid/1% Antistatic
(+/- 3%)
Weight (g/m2)
EN 40339
220
(+/- 5%)
Width (cm)
EN 1773
155
(+/- 1%)
Mechanical Qualities
Method
Values
Tensile strength warp
EN 13934-1
700 N
Tensile strength weft
EN 13934-1
500 N
Tear strength warp
EN 13937-2
20 N
Tear strength weft
EN 13937-2
20 N
Pilling
EN 12945-2
5
Abrasion
EN 12947-2
>80.000 cycles
Dimensional Stability to Washings
Method
Values
Warp
EN 25077
<3%
Weft
EN 25077
<3%
Normative
Level
EN 11612 Protective clothing - Clothing to protect against heat and flame.
A1 A2 B1 C1 F1
EN 1149-3 Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay
Pass
Flame Retardant
ISO 6940:2004
MOPP-1 TECHNICAL PRODUCT TESTING
samples
The details of the received sample are presented in Table 1.
Table 1: Received sample
Sample code MIRA
Description by Customer
received
21pq0928
AvEc-Ms-1-BATCH 1
04-05-2021
Test Method
The detailed description of the test procedures is presented in the Annex.
Results
The test results are presented in the Tables 2 and 3. Note that the test results are only applicable to the tested material, mentioned in Table 1.
Table 2: Laid droplet, diffusive flow HD, 10 g/m? (5% RH, 30°C, 24 hours, 1ul drops)
Sample code
penetrated amount (ug/cm?)
21PQ0928A
<0.05
21PQ0928B
<0.05
21PQ0928C
<0.05
Table 3: Vapour test, HD, target concentration 11 mg/m? (80% RH, 30°C, 6 hours, wind speed 5 m/s)
Sample code
Challenge (mg/m3)
Velocity through sample (cm/s)
Penetrated dose (mg.min/m3)
21PQ0928A
12
0.33
<3.7
21PQ0928B
12
0.33
<3.8
21PQ0928C
12
0.34
<3.7
Samples
The details of the received samples are presented in Table 1.
Table 1: Received samples
Sample code
Description by Customer
received
20PQ2305
Outer shell: 0QAMEU0476, open ripstop with DWR&FR finish, new
04-11-2020
20PQ2306
Filter layer: ALLGO0002N, sphere filter, 345 g/m2 3 ply filter with 04-11-2020 non woven white and sphere active carbon and black knit, new
04-11-2020
20PQ2307
Outer shell: 0AAMEU0476, open ripstop with DWR&FR finish,pie 10x washed ISO 6330, 4N, tumbler dry low temperature
04-11-2020
20PQ2308
Filter layer: ALL60002N, sphere filter, 345 g/m2 3 ply filter with non woven white and sphere active carbon and black knit, 10x washed ISO 6330, 4N, tumbler dry low temperature
04-11-2020
Test Method
The detailed description of the test procedures is presented in the Annex.
Results
The test results are presented in the Tables 2 through 9. Note that the test results are only applicable to the tested materials, mentioned in Table 1.
Table 2: Laid droplet, convective flow 5 m/s, HD, 10 g/m? (80% RH, 30°C, 24 hours, 1)
Sample code
State
Velocity through sample (cm/s)
Penetrated dose (mg.min/m3)
20PQ2306/20PQ2305A
New
2.2
482
20PQ2306/20PQ2305B
New
2.2
347
20PQ2306/20PQ2305C
New
2.3
485
20PQ2308/20PQ2307A
Washed10x
1.3
181
20PQ2308/20PQ2307B
Washed10x
1.3
268
20PQ2308/20PQ2307C
Washed10x
1.5
292
Table 3: Vapour test 5 m/s, HD, target concentration 11 mg/m? (80% RH, 30°C, 6 hours)
Sample code
State
Challenge (mg/33)
Velocity through sample (cm/s)
Penetrated dose (mg.min/m3)
20PQ2306/20PQ2305A
New
11
2.2
65
20PQ2306/20PQ2305B
New
11
2.6
80
20PQ2306/20PQ2305C
New
11
2.8
107
20PQ2308/20PQ2307A
Washed10x
11
1.3
25
20PQ2308/20PQ2307B
Washed10x
11
1.3
14
20PQ2308/20PQ2307C
Washed10x
11
1.5
28
Table 4: Vapour test 1 m/s, HD, target concentration 55 mg/m? (80% RH, 30°C, 6 hours)
Sample code
State
Challenge (mg/33)
Velocity through sample (cm/s)
Penetrated dose (mg.min/m3)
20PQ2306/20PQ2305A
New
56
0.11
<12
20PQ2306/20PQ2305B
New
56
0.11
<12
20PQ2306/20PQ2305C
New
56
0.9
<14
20PQ2308/20PQ2307A
Washed10x
56
0.7*
<20
20PQ2308/20PQ2307B
Washed10x
56
0.7*
<20
20PQ2308/20PQ2307C
Washed10x
56
0.7*
<20
Due to equipment restrictions, the minimum flow of 50 ml/min (= 0.07 cm/s) was applied, instead of the required 42-48 ml/min.
Table 5: Vapour test 5 m/s, GD, target concentration 11 mg/m® (80% RH, 30°C, 6 hours
Sample code
State
Challenge (mg/33)
Velocity through sample (cm/s)
Penetrated dose (mg.min/m3)
20PQ2306/20PQ2305A
New
11
1.8
60
20PQ2306/20PQ2305B
New
11
1.9
51
20PQ2306/20PQ2305C
New
11
1.9
68
20PQ2308/20PQ2307A
Washed10x
11
1.6
38
20PQ2308/20PQ2307B
Washed10x
11
1.5
48
20PQ2308/20PQ2307C
Washed10x
11
1.5
29
Table 6: Vapour test 1 m/s, GD, target concentration 55 mg/m3 (80% RH, 30°C, 6 hours)
Sample code
State
Challenge (mg/33)
Velocity through sample (cm/s)
Penetrated dose (mg.min/m3)
20PQ2306/20PQ2305A
New
55
0.07
<14
20PQ2306/20PQ2305B
New
55
0.10
<10
20PQ2306/20PQ2305C
New
55
0.10
<10
20PQ2308/20PQ2307A
Washed10x
55
0.07*
<16
20PQ2308/20PQ2307B
Washed10x
55
0.07*
<16
20PQ2308/20PQ2307C
Washed10x
55
0.07*
<16
Due to equipment restrictions, the minimum flow of 50 ml/min (= 0.07 cm/s) was applied, instead of the required 42-48 ml/min.
Table 7: Laid droplet 0.5 m/s diffusive flow HD, 10 g/m? 30°C, 24 hours, 1ul drops)
Sample code
State
Penetrated amount (ug/cm2)
20PQ2306/20PQ2305A
New
<0.08
20PQ2306/20PQ2305B
New
1.0
20PQ2306/20PQ2305C
New
<0.08
20PQ2308/20PQ2307A
Washed10x
<0.08
20PQ2308/20PQ2307B
Washed10x
<0.08
20PQ2308/20PQ2307C
Washed10x
<0.08
Table 8: Laid droplet 0.5 m/s, diffusive flow GD, 10 g/m? (80% RH,30°C, 24 hours, 1ul drops)
Sample code
State
Penetrated amount (ug/cm2)
20PQ2306/20PQ2305A
New
0.53
20PQ2306/20PQ2305B
New
0.32
20PQ2306/20PQ2305C
New
0.14
20PQ2308/20PQ2307A
Washed10x
0.12
20PQ2308/20PQ2307B
Washed10x
<0.06
20PQ2308/20PQ2307C
Washed10x
0.10
Table 9: Laid droplet, diffusive flow LVAP, VX, 10 g/m? (5% RH, 30°C, 24 hours, 1ul drops)
Sample code
State
Penetrated amount (ug/cm2)
20PQ2306/20PQ2305A
New
1.0
20PQ2306/20PQ2305B
New
0.93
20PQ2306/20PQ2305C
New
0.21
20PQ2308/20PQ2307A
Washed10x
0.30
20PQ2308/20PQ2307B
Washed10x
0.41
20PQ2308/20PQ2307C
Washed10x
0.48
PRODUCT CARE INSTRUCTIONS
PREPARE ITEM BY ZIPPING UP ALL POCKETS
WASH IN WARM WATER ONLY
NO DETERGENT
TUMBLE DRY UNTIL ITEM IS THOROUGHLY DRY
MOPP Suit Size Guide
The MOPP-1 CBRN Protective suit is available in three different sizes (available as size pairs):
Small - Medium (SM/MD)
Large - Extra Large (LG/XL)
2X Large -3X Large (2XL/3XL)
SM/MD
LG/XL
2XL/3XL
Chest Girth- measures over the biggest bulk of the breast just under the armpit
78-86
86-94
94-102
102-110
110-118
118-129
Waist Girth- measures the smallest part of the upper body
66-74
74-82
82-90
90-98
98-106
106-117
Person's Height- measures the total length from the head to ground
156-164
164-172
172-180
180-188
188-196
196-204
***Dimensions in cm
MIRA Safety MOPP-1 CBRN Protective Suit
Cordyceps and CBRN Gear: How to Survive 'The Last of Us
vinmax Fire Resistant Unisex Industrial Suit Thermal Radiation 1000 Degree Heat Resistant Aluminized Suit Fireproof Clothes: : Tools & Home Improvement
Hazmat Suit
MIRA Safety MOPP-1 CBRN Protective Suit
The MIRA Safety MOPP-1 CBRN Protective Suit provides next-generation protection from chemical, biological, and even nuclear threats. Whereas most
MIRA Safety MOPP-1 CBRN Protective Suit | Washable, Semi-permeable, Chemical-Resistant Coverall with Integrated Hood
MIRA Safety MOPP-1 CBRN Protective Suit Washable, Semi-permeable, Chemical-Resistant Coverall with Integrated Hood (Beige, SM/MD) : Tools & Home Improvement
MIRA Safety MOPP-1 CBRN Protective Suit SM/MD Size Free Shipping
Due to Demand Allow 4-6 Weeks for delivery on all MIRA Safety Products, The MIRA Safety MOPP-1 CBRN Protective Suit provides next-generation
MIRA Safety MOPP-1 CBRN Protective Suit
HAZMAT Suits
Cordyceps and CBRN Gear: How to Survive 'The Last of Us