Mazdaspeed Throttle Body Spacer
Need a nice clean setup to inject additional fluid meth, or methanol into your air stream on your Mazdaspeed? Don't want to tap pipes on your car? Look no further. The Damond Motorsports Throttle Body Spacer has six 1/8 NPT ports to hook up whatever you want to inject right into the intake manifold.
Need a nice clean setup to inject additional fluid into your air stream? Don't want to tap pipes on your car? Look no further.
The Damond Motorsports Throttle Body Spacer has six 1/8 NPT ports to hook up whatever you want to inject right before the intake manifold. It sandwiches between your throttle body and intake manifold and allows you to thread in multiple nozzles, lines, or injectors for as much as 800 hp of fuel! The spacer comes with all the hardware you need for an easy install, including bolts, washers, and all the plugs you'll need.
This spacer uses an o-ring on the throttle body side and stock throttle body gasket on the manifold side, so 1 OEM gasket is needed total(in most cases you can re-use your OEM gasket). Please select the option you need for additional gaskets. Supplied gaskets will be OEM Mazda gaskets.
Will work with stock TMIC on Mazdaspeed 3 2007-2013 and Mazdaspeed 6 2007. You will need to trim the cold side boost tube 16mm.
Will NOT work with Mazdaspeed6 stock cold pipe.
Injectors and/or nozzles are not included.
Kansei tuner lugs 12×1.5 Black – PD-Tuning
CB70 Distributor Blanking Cap
volvo przepustnica - Wałbrzych - sprawdź kategorię Części samochodowe
Mazdaspeed3 ST Manifold Adapter Kit
Fuel Damond Motorsports
Mazda – tagged Mazdaspeed6 – Graveyard Performance
SP63 Stage 1 Built Long Block For Mazdaspeed MZR-DISI Rated 500hp
AEM Methanol KIT Internal Boost Reference – PD-Tuning
OEM genuine parts Damond Motorsports
JBR Methanol Injection Spacer for Mazdaspeed 3 / 6 / CX-7 #MS-INJ
