Mold Star 15 Slow

4.7

(302)

Write Review

$ 5.50

Add to Cart

Qty

In stock

Description

Unit Size Net Weight Pint Kit 2 lb Gallon Kit 18 lb Five Gallon Kit 90 lb Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. Note: This product will not work with modeling clays containing sulfur under
Unit Size Net Weight Pint Kit 2 lb Gallon Kit 18 lb Five Gallon Kit 90 lb Mold Star rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star rubber is heat resistant up to 450F (232C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX is NOT compatible with Mold Star rubbers. Note: This product will not work with modeling clays containing sulfur under any circumstances.Guide to Making Silicone Molds from SLA 3D Printed Models Properties Technical Properties Mix Ratio by Weight 1A:1B Mix Ratio by Volume 1A:1B Pot Life 50 minutes Cure Time 4 hours Color Green Shore Hardness 15A Mixed Viscosity 12,500 cps Shrinkage < .001 in./in. Specific Volume 23.5 cu. in./lb. Specific Gravity 1.18g/cc Useful Temperature (max)< 450F Useful Temperature (min)< -65F Tensile Strength 400 psi 100% Modulus 55 psi Elongation @ Break 440% Die B Tear Strength 88 pli Media CASTING A SILICONE MOLD USING MOLD STAR SERIES SILICONES Documentation Technical Bulletin Related Products RELATED PRODUCTS: Mixing Equipment Silc Pig Silicone Pigments Ignite Fluorescent Colorants Ease Release 200 Ease Release 205