Seat Belt Square Back Plate 65 x 65 x 3mm with welded nut, locator hole & rounded corners as per FIA spec and suitable for MSNZ, if used by itself it must be welded in, otherwise you'll require use of the GE50CBS counter plate to be used on opposite side of panel in conjunction. Stock my vary from time to time from
Seat Belt Square Back Plate 65 x 65 x 3mm with welded nut, locator hole & rounded corners as per FIA spec and suitable for MSNZ, if used by itself it must be welded in, otherwise you'll require use of the GE50CBS counter plate to be used on opposite side of panel in conjunction. Stock my vary from time to time from that pictured.
Grayston Seat Belt Square Back Plate 55mm x 55mm x 3mm with welded nut, locator hole & rounded corners. Please note: These do not meet FIA regulations
Belt Anchor Plate - 55mm - GE50-55 (Non FIA)
Seatbelts Edge Performance Par
BOLT, SEAT BELT - #386274-S - National Parts Depot
Backing Plate - FIA - Racetech NZ
Safety belt 2 pt red 65 Seat belts 2-point - Seat belts - Int
Seat belt Counter Plate or Belt Anchor Plate FIA - 65mm - GE50BS or bo – Palmside NZ
FuelTech FT PRO racing harness is FIA 8853-2016 certified. Features pull down straps for easy adjustment, camlock, 3” lap belt, 2” dual crotch straps,
FT PRO 6 Point Camlock Racing Harness FIA 2/3
FuelTech FT PRO racing harness is FIA 8853-2016 certified. Features pull down straps for easy adjustment, camlock, 3” lap belt, 2” dual crotch straps,
FT PRO 6 Point Camlock Racing Harness FIA 2/3
65-73 SEAT BELT ANCHOR PLATE (WELDS TO FLOOR PAN)
Grayston harness eyebolt back plates are made from high quality heat treated carbon steel., Essential for seat belt fitting, 65mm x 65mm x 3mm
Grayston Harness Eyebolt Back Plate
Grayston Straight Seat Belt Mounting Anchors, Flat Harness Mountings
Seat Belt Anchor Plates
Grayston harness eyebolt back plates are made from high quality heat treated carbon steel., Essential for seat belt fitting, 65mm x 65mm x 3mm
Grayston Harness Eyebolt Back Plate