0.192 in. ID 0.250 in. OD 1.746 in. Long Brass Spacer - AndyMark, Inc

Brass axle used in the 6 in. Mecanum wheels.

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

0.192 in. ID 0.375 in. OD 0.250 in. Long Aluminum Spacer - AndyMark, Inc

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

0.515 in. ID 0.690 in. OD 0.250 in. Long Aluminum Spacer For 57 Sport - AndyMark, Inc

0.344 in. ID Brass Washer - AndyMark, Inc

0.5 in. Hex Aluminum Spacer Stock - AndyMark, Inc

0.257 in. ID 0.375 in. OD 1.875 in. Long Aluminum Spacer For Thin Box Tube - AndyMark, Inc

0.500 in. ID 0.750 in. OD 1.200 in. Long Aluminum Hex Bore Spacer - AndyMark, Inc

0.344 in. ID Brass Washer - AndyMark, Inc

This is a plastic shoulder spacer. It is a spacer with a flange on one end. It is particularly usefull for turning a 1/2 in. round bearing into a 3/8

0.375 in. ID 0.500 in. OD 0.320 in. Long Nylon Shoulder Spacer

0.5 in. Hex Aluminum Spacer Stock - AndyMark, Inc

0.5 in. Hex Aluminum Spacer Stock - AndyMark, Inc

One great feature to brass is it's surface friction is quite low. We use these brass tubes as axles in some of our mecanum wheels.

0.192 in. ID 0.250 in. OD 1.746 in. Long Brass Spacer - AndyMark, Inc

Sourcing the right stock for the right job can be hard sometimes. No longer is that true for 1/2 inch hex spacer stock! Offered in precisely machined

0.500 in. ID 0.750 in. OD 1.200 in. Long Aluminum Hex Bore Spacer

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc